Custom homes · Stanton
Built by Avorino · Luxury Custom Home, Aliso ViejoCustom Homes in Stanton
Ground-up custom residences across Stanton — architecture, structural, mechanical, electrical, and plumbing, and finish carpentry under one roof. Fixed-price design-build contracts. Avorino from the first consultation through the warranty handover.
Talk To Us
Your name and number is enough to start — Avorino follows up with a written scope for your Stanton project.
Get a free estimate Or call (714) 900-3676
Photographs: Luxury Custom Home, Aliso Viejo, built by Avorino.
Stanton Custom Home Construction
The most densely built of its neighbors — roughly 38,000 residents in 3.1 sq mi — with a housing mix unusually heavy in mobile- and manufactured-home parks alongside compact 1950s-70s single-family tracts and condos. Avorino builds throughout West Stanton, the Katella Avenue corridor, the Cerritos Avenue and Civic Center area, and the Beach Boulevard central corridor. Avorino runs inland custom homes end-to-end. Architect coordination, structural engineering, plan-check correspondence, fixed-price design-build contract, and the tiered warranty (1yr fit & finish · 4yr systems · 10yr structural) through final walk.7+ years of Orange County experience · 150+ completed projects · 4.8 Yelp average across 35+ reviews.
Get a free estimateCustom Homes · Stanton
Stanton's small, tightly packed lots — among the most compact and highest-density in the area — push most new custom-home work toward teardown-rebuild on existing flat single-family parcels rather than the mobile-home-park stock, which is not typically redevelopable into site-built homes. Avorino operates in Orange County under General-B License #1107538, with 7+ years of OC experience and a 4.8-star Yelp average across 35+ reviews. Architecture, structural engineering, permitting, construction, and the tiered warranty all sit under one roof — one accountable builder from first conversation through final handover.
Avorino's design-build model means architecture, structural engineering, Title 24 calculations, and soils (where Stanton lots require it) all sit under one roof. You sign once at the start; the coordination across disciplines runs through one office.
Submittal, plan-check comments, resubmittal, and final inspection all run through one office. Avorino builds drawings against how Stanton handles planning and zoning review, including the block-by-block setback variations that surprise out-of-area builders, so the set walks in ready for what the city checks.
Cabinetry, stone, tile, paint, fixtures, appliances — every line item picked against a written allowance log so the bid doesn't drift during construction. Stanton clients see the finish board before demolition starts.
Every Avorino build ships with a tiered construction warranty: 1-year fit & finish (paint, trim, mirrors, flooring, cabinets, countertops), 4-year systems (plumbing, electrical, HVAC), 10-year structural. Same Avorino team you started with takes the warranty call.
@avorinoconstruction
No published Stanton custom home yet — here's recent Avorino work from across Orange County.
“These are the best people in the business. I used Avorino to build my own ADU. They beat every single price I got and on top of that did an excellent job finishing it in no time. Truly the best of the best — highly recommended.”
What we build in Stanton (4)
Single-family ground-up custom homes — modern, traditional, transitional. Architectural intent preserved.
Clay-tile rooflines, stucco, archways, hand-troweled plaster. Restoration carpentry that reads era-correct.
Classical proportions with restrained ornament. Finish carpentry held to the framing standard.
Whole-house gut renovations that read as new construction. Strip, reframe, mechanical, electrical, and plumbing modernization, finish carpentry.
Built by Avorino · San Juan Capistrano
A time-lapse visualization of the pool-house build, from cleared lot to the finished pool house, outside and in.
Stanton regulations
A working summary of the rules Avorino designs against on every Stanton project — submittal, comment rounds, and inspections run in one office and resolved in writing.
01 / 04
Stanton residential standards we design against.
02 / 04
Stanton Community Development
03 / 04
What the lot calls for before construction starts.
04 / 04
What every new SFR carries by California state law.
Stanton permit reality
Avorino drafts the drawings for single-family custom builds against Stanton's published code. The variable is which plan checker draws your set and what they flag — the set is built for that, so comments resolve in one round where the city allows.
Stanton lot profile
A flat, low-lying city (~66 ft) and one of Orange County's smallest at 3.1 square miles, with a 'southern salient' that bisects neighboring Garden Grove.
All Stanton construction and permitting details on this page, including fees, setbacks, timelines, and zoning, are based on the City of Stanton Building & Safety Division's published information and are subject to change. This information may not be fully up to date or accurate. For the latest requirements, visit the City of Stanton Building & Safety Division directly, and confirm anything that affects your budget or schedule before you build.
Official Stanton resources this page draws from
Stanton investment range
Stanton custom homes typically land at $900K – $3.5M+. The variance inside that range depends on lot complexity, finish level, structural ambition, and how much foundation and utility work the existing lot demands.
Finish carpentry
Cabinetry, stair carpentry, window trim, paint cuts — the trades where rushed jobs reveal themselves. Every Avorino custom-home interior is shop-built, drawing-checked, and dry-fit before paint.
Same team, end-to-end
Architecture, structural engineering, permitting, construction, and the tiered warranty — coordinated under one roof, one builder on point through every trade. You sign once; the disciplines are sequenced so they don't fight each other in the field.
Recent builds
01 / 08
Yes. Avorino carries California General-B License #1107538 and builds custom homes in Stanton end-to-end: architecture, structural engineering, permits, and construction under one roof. As the Stanton custom home builder and general contractor on your project, Avorino owns the schedule and the outcome, rather than coordinating a chain of subcontractors you'd manage yourself.
Custom homes in Stanton typically run $900K – $3.5M+ depending on size, finish level, and lot conditions. Avorino quotes a fixed-price design-build contract so the budget you sign at week one is the budget at the warranty handover.
Permit-to-keys windows in Stanton typically land at 14 – 24+ months for a standard single-family build. Architecture, structural, and finish trades are sequenced to overlap.
Yes. Avorino runs every Stanton permit submittal, plan-check correction, and final inspection through one office. You sign once at the start; from there, permitting and inspections run through us.
Every Avorino build ships with a tiered construction warranty: 1-year fit & finish, 4-year systems (plumbing, electrical, HVAC), and 10-year latent structural. Avorino takes the warranty call.
Free consultation
Avorino reviews your project and comes back with a fixed-price design-build proposal and a written timeline, calibrated to Stanton's permit reality.
Same city, other services
Custom Homes in other Orange County cities
